60 Seconds Binary Options Signals. - Altredo

CRTPi4-RCA v3.4FX - Composite TV-Out for your Pi4!

CRTPi Project Presents:

CRTPi4-RCA v3.4FX

A CRTPi image for running 240p via 3.5mm Composite on the Raspberry Pi4
Other Releases:
Changelog: v3.4FX for RCA (PAL Only) 5/18/2020
Changelog: v3.4FX for RCA (NTSC&&PAL) 5/17/2020
Changelog: v3.0F for RCA 5/11/2020
Changelog: v2.0F for RCA 4/1/2020
Changelog: v1.1FX 12/20/2019
Changelog: v1.0F Hotfix 10/31/2019
Changelog: v1.0F 10/29/2019
Changelog: v0.4 10/22/2019
Changelog: v0.3 10/2/2019
How does this even work!?
The amazing u/b0xspread has found a way to enforce modeswitching by watching the logs and processes, and continuing to enforce our desired mode long after the system wants to revert back. We're both expanding this scripting further to hopefully solve the same issues on the RGB and VGA forks -- but progress is slow due to the complex and varied nature of available resolution modes on those builds. But for now, let's just call this "black magic."
What Does That Look Like?
Here are some examples of games being played in beautiful 240p on CRT sets using the RCA Image!.
What is Different?
  • Retropie 4.6 (build 72132587 commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • Full Apt-Upgrade for newest firmware and app dependancies (Recommended to repeat this function on your own Pi4)
  • 4GB (3872256 KB Uncompressed Image) (Compressed via WinRAR to 1043540KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Heavily modified Sakitoshi CRT-TVout script for switching between 480i and 240p
  • Further modified Sakitoshi script by u/b0xspread to allow video resolution switching on Pi4 Architecture
  • Optional overclock values in /boot/config.txt for Pi4 (disabled by default) [RECOMMENDED!]
  • NTSC @ 60hz 720/640x480 480i Resolution for Emulationstation & Kodi
  • PAL @ 50hz 720/640x576 576i Resolution for Emulationstation & Kodi
  • NTSC @ 60hz 640x480 Progressive (240 lines) for Retroarch
  • PAL @ 50hz 640x576 Progressive (288 lines) for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Optional 480i mode for PSX and Arcade games
  • Preloaded with free 240p test suites for multiple consoles
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Preloaded with 4:3 Ruckage's runcommand launching screens for supported systems
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Retroarch FCEUmm (NES) Emulator preconfigured for 4:3 horiz/vert overscan crop enabled w/ composite-direct-fbx pallete
  • Retroarch Picodrive (SMS/32X) Emulator preconfigured for 4:3 with 1X Sega Mastersystem & 1X Sega 32X resolution
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (Special 1 Pallete) mode with 2x integer scale SGB Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with 2x integer scale GBP Overlay
  • Other Retroarch handheld emulators preset for optimized wide display with overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini theme configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
Runahead Tested ~60FPS Stable:
  • Game Gear
  • Game Boy
  • Game Boy Color
  • Game Boy Advance
  • Master System
  • Megadrive
  • NES
  • PC Engine
  • PCE-CD
  • Sega 32X
  • Sega CD
  • SNES
Runahead Tested < 50FPS Unstable:
  • FB Neo
  • FB Alpha
  • Mame
  • N64
  • PlayStation
  • PSP
Runahead Untested:
  • Atari 800
  • Atari 2600
  • Atari 5200
  • Atari 7800
  • Atari Lynx
  • Coleco
  • Intellivision
  • MSX
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copywritten games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi4-RCA NTSC v3.4F: For Raspberry Pi4 Composite-Out @ 60hz
MD5: 7df8453c2e8029b06def7864351ec768 
CRTPi4-RCA PAL-D v3.4F: For Raspberry Pi4 Composite-Out @ 50hz
MD5: ab2bd6ab228bd6f58a22de15044fb46a 
How do I install the Arcade Configuration Pack?
These are the resolution-correct preset arcade configs for MAME/FBA including vertical games. There is roughly 38K files in there, spread out across several systems (arcade, fba, mame-libretro, and neogeo). Having these pre-installed would not allow either image to fit on the SD card used, and may not be needed for everyone. It's a fairly simple process that won't take more than a few minutes of your time.
  • Drop to shell or connect via SSH, and navigate to root (cd /)
  • Download the CRTPi-RCA_ArcadePack.zip with the command:
    sudo wget https://github.com/crtpi/CRTPi-Project/raw/masteCRTPi-RCA_ArcadePack.zip
  • Unzip and overwrite files with the command:
    sudo unzip -o -q CRTPi-RCA_ArcadePack.zip
  • Remove the zip with the command
    sudo rm CRTPi-RCA_ArcadePack.zip
  • Restore read/write access to the files you have overwritten with the command:
    sudo chmod a+rw -R /opt/retropie/configs/
How can I take full advantage of the 480i/240p Switching?
To force 480i for a system or game, you can create a '480i.txt' file inside the configuration folder of the system with a list of the file names (case insensitive, extension optional but recommended) you want to force.
If you wish to force 480i for a whole system, you can write "all" inside the '480i.txt' file.
Alternatively you can create a "240p.txt" file to force 480i to all games except for the ones inside the list.
You can read more about the script functionality here.
Example:
/opt/retropie/configs/psx/480i.txt containing "Bloody Roar 2.PBP" to force 480i for the file "Bloody Roar 2.PBP" /opt/retropie/configs/psx/480i.txt containing "all" to force 480i for all the PlayStation games. /opt/retropie/configs/ports/kodi/480i.txt containing "all" to force 480i on Kodi. 
I have X Issue! Help?
Why isn't there a Pi4 PAL version?
Try as I might, I have been unable to get a PAL signal out of the SDTV port on a Pi4. My BVM displays PAL-S and PAL-D fine, but neither will get anything but static. I don't even get a rolling B&W image, just horrible static. If you figure out a way, let me know!
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
I want to switch back to lr-mupen64plus!
  • When launching an n64 game, mash buttons on the controller until the runcommand window comes up.
  • Select on "1 Set default emulator for n64" and choose "lr-mupen64plus"
  • Then "Q Exit (without launching)"
  • Launch the game again -- it will launch in the chosen emulator at the proper resolution
What A/V cable should I use for 3.5mm Composite?
I recommend the Zune A/V cable or XBOX 360E cable, you can find them on eBay and Amazon.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi4-RCA v3.4FX - Composite TV-Out for your Pi4!

CRTPi Project Presents:

CRTPi4-RCA v3.4FX

A CRTPi image for running 240p via 3.5mm Composite on the Raspberry Pi4
Other Releases:
Changelog: v3.4FX for RCA (PAL Only) 5/18/2020
Changelog: v3.4FX for RCA (NTSC&&PAL) 5/17/2020
Changelog: v3.0F for RCA 5/11/2020
Changelog: v2.0F for RCA 4/1/2020
Changelog: v1.1FX 12/20/2019
Changelog: v1.0F Hotfix 10/31/2019
Changelog: v1.0F 10/29/2019
Changelog: v0.4 10/22/2019
Changelog: v0.3 10/2/2019
How does this even work!?
The amazing u/b0xspread has found a way to enforce modeswitching by watching the logs and processes, and continuing to enforce our desired mode long after the system wants to revert back. We're both expanding this scripting further to hopefully solve the same issues on the RGB and VGA forks -- but progress is slow due to the complex and varied nature of available resolution modes on those builds. But for now, let's just call this "black magic."
What Does That Look Like?
Here are some examples of games being played in beautiful 240p on CRT sets using the RCA Image!.
What is Different?
  • Retropie 4.6 (build 72132587 commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • Full Apt-Upgrade for newest firmware and app dependancies (Recommended to repeat this function on your own Pi4)
  • 4GB (3872256 KB Uncompressed Image) (Compressed via WinRAR to 1043540KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Heavily modified Sakitoshi CRT-TVout script for switching between 480i and 240p
  • Further modified Sakitoshi script by u/b0xspread to allow video resolution switching on Pi4 Architecture
  • Optional overclock values in /boot/config.txt for Pi4 (disabled by default) [RECOMMENDED!]
  • NTSC @ 60hz 720/640x480 480i Resolution for Emulationstation & Kodi
  • PAL @ 50hz 720/640x576 576i Resolution for Emulationstation & Kodi
  • NTSC @ 60hz 640x480 Progressive (240 lines) for Retroarch
  • PAL @ 50hz 640x576 Progressive (288 lines) for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Optional 480i mode for PSX and Arcade games
  • Preloaded with free 240p test suites for multiple consoles
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Preloaded with 4:3 Ruckage's runcommand launching screens for supported systems
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Retroarch FCEUmm (NES) Emulator preconfigured for 4:3 horiz/vert overscan crop enabled w/ composite-direct-fbx pallete
  • Retroarch Picodrive (SMS/32X) Emulator preconfigured for 4:3 with 1X Sega Mastersystem & 1X Sega 32X resolution
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (Special 1 Pallete) mode with 2x integer scale SGB Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with 2x integer scale GBP Overlay
  • Other Retroarch handheld emulators preset for optimized wide display with overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini theme configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
Runahead Tested ~60FPS Stable:
  • Game Gear
  • Game Boy
  • Game Boy Color
  • Game Boy Advance
  • Master System
  • Megadrive
  • NES
  • PC Engine
  • PCE-CD
  • Sega 32X
  • Sega CD
  • SNES
Runahead Tested < 50FPS Unstable:
  • FB Neo
  • FB Alpha
  • Mame
  • N64
  • PlayStation
  • PSP
Runahead Untested:
  • Atari 800
  • Atari 2600
  • Atari 5200
  • Atari 7800
  • Atari Lynx
  • Coleco
  • Intellivision
  • MSX
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copywritten games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi4-RCA NTSC v3.4F: For Raspberry Pi4 Composite-Out @ 60hz
MD5: 7df8453c2e8029b06def7864351ec768 
CRTPi4-RCA PAL-D v3.4F: For Raspberry Pi4 Composite-Out @ 50hz
MD5: ab2bd6ab228bd6f58a22de15044fb46a 
How do I install the Arcade Configuration Pack?
These are the resolution-correct preset arcade configs for MAME/FBA including vertical games. There is roughly 38K files in there, spread out across several systems (arcade, fba, mame-libretro, and neogeo). Having these pre-installed would not allow either image to fit on the SD card used, and may not be needed for everyone. It's a fairly simple process that won't take more than a few minutes of your time.
  • Drop to shell or connect via SSH, and navigate to root (cd /)
  • Download the CRTPi-RCA_ArcadePack.zip with the command:
    sudo wget https://github.com/crtpi/CRTPi-Project/raw/masteCRTPi-RCA_ArcadePack.zip
  • Unzip and overwrite files with the command:
    sudo unzip -o -q CRTPi-RCA_ArcadePack.zip
  • Remove the zip with the command
    sudo rm CRTPi-RCA_ArcadePack.zip
  • Restore read/write access to the files you have overwritten with the command:
    sudo chmod a+rw -R /opt/retropie/configs/
How can I take full advantage of the 480i/240p Switching?
To force 480i for a system or game, you can create a '480i.txt' file inside the configuration folder of the system with a list of the file names (case insensitive, extension optional but recommended) you want to force.
If you wish to force 480i for a whole system, you can write "all" inside the '480i.txt' file.
Alternatively you can create a "240p.txt" file to force 480i to all games except for the ones inside the list.
You can read more about the script functionality here.
Example:
/opt/retropie/configs/psx/480i.txt containing "Bloody Roar 2.PBP" to force 480i for the file "Bloody Roar 2.PBP" /opt/retropie/configs/psx/480i.txt containing "all" to force 480i for all the PlayStation games. /opt/retropie/configs/ports/kodi/480i.txt containing "all" to force 480i on Kodi. 
I have X Issue! Help?
Why isn't there a Pi4 PAL version?
Try as I might, I have been unable to get a PAL signal out of the SDTV port on a Pi4. My BVM displays PAL-S and PAL-D fine, but neither will get anything but static. I don't even get a rolling B&W image, just horrible static. If you figure out a way, let me know!
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
I want to switch back to lr-mupen64plus!
  • When launching an n64 game, mash buttons on the controller until the runcommand window comes up.
  • Select on "1 Set default emulator for n64" and choose "lr-mupen64plus"
  • Then "Q Exit (without launching)"
  • Launch the game again -- it will launch in the chosen emulator at the proper resolution
What A/V cable should I use for 3.5mm Composite?
I recommend the Zune A/V cable or XBOX 360E cable, you can find them on eBay and Amazon.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
submitted by ErantyInt to crtgaming [link] [comments]

Binary Options Review; Best Binary Options Brokers

Binary Options Review; Best Binary Options Brokers

Binary Options Review; Best Binary Options Brokers
We have compared the best regulated binary options brokers and platforms in May 2020 and created this top list. Every binary options company here has been personally reviewed by us to help you find the best binary options platform for both beginners and experts. The broker comparison list below shows which binary trading sites came out on top based on different criteria.
You can put different trading signals into consideration such as using payout (maximum returns), minimum deposit, bonus offers, or if the operator is regulated or not. You can also read full reviews of each broker, helping you make the best choice. This review is to ensure traders don't lose money in their trading account.
How to Compare Brokers and Platforms
In order to trade binary options, you need to engage the services of a binary options broker that accepts clients from your country e.g. check US trade requirements if you are in the United States. Here at bitcoinbinaryoptionsreview.com, we have provided all the best comparison factors that will help you select which trading broker to open an account with. We have also looked at our most popular or frequently asked questions, and have noted that these are important factors when traders are comparing different brokers:
  1. What is the Minimum Deposit? (These range from $5 or $10 up to $250)
  2. Are they regulated or licensed, and with which regulator?
  3. Can I open a Demo Account?
  4. Is there a signals service, and is it free?
  5. Can I trade on my mobile phone and is there a mobile app?
  6. Is there a Bonus available for new trader accounts? What are the Terms and
  7. conditions?
  8. Who has the best binary trading platform? Do you need high detail charts with technical analysis indicators?
  9. Which broker has the best asset lists? Do they offer forex, cryptocurrency, commodities, indices, and stocks – and how many of each?
  10. Which broker has the largest range of expiry times (30 seconds, 60 seconds, end of the day, long term, etc?)
  11. How much is the minimum trade size or amount?
  12. What types of options are available? (Touch, Ladder, Boundary, Pairs, etc)
  13. Additional Tools – Like Early closure or Metatrader 4 (Mt4) plugin or integration
  14. Do they operate a Robot or offer automated trading software?
  15. What is Customer Service like? Do they offer telephone, email and live chat customer support – and in which countries? Do they list direct contact details?
  16. Who has the best payouts or maximum returns? Check the markets you will trade.
The Regulated Binary Brokers
Regulation and licensing is a key factor when judging the best broker. Unregulated brokers are not always scams, or untrustworthy, but it does mean a trader must do more ‘due diligence’ before trading with them. A regulated broker is the safest option.
Regulators - Leading regulatory bodies include:
  • CySec – The Cyprus Securities and Exchange Commission (Cyprus and the EU)
  • FCA – Financial Conduct Authority (UK)
  • CFTC – Commodity Futures Trading Commission (US)
  • FSB – Financial Services Board (South Africa)
  • ASIC – Australia Securities and Investment Commission
There are other regulators in addition to the above, and in some cases, brokers will be regulated by more than one organization. This is becoming more common in Europe where binary options are coming under increased scrutiny. Reputable, premier brands will have regulation of some sort.
Regulation is there to protect traders, to ensure their money is correctly held and to give them a path to take in the event of a dispute. It should therefore be an important consideration when choosing a trading partner.
Bonuses - Both sign up bonuses and demo accounts are used to attract new clients. Bonuses are often a deposit match, a one-off payment, or risk-free trade. Whatever the form of a bonus, there are terms and conditions that need to be read.
It is worth taking the time to understand those terms before signing up or clicking accept on a bonus offer. If the terms are not to your liking then the bonus loses any attraction and that broker may not be the best choice. Some bonus terms tie in your initial deposit too. It is worth reading T&Cs before agreeing to any bonus, and worth noting that many brokers will give you the option to ‘opt-out’ of taking a bonus.
Using a bonus effectively is harder than it sounds. If considering taking up one of these offers, think about whether, and how, it might affect your trading. One common issue is that turnover requirements within the terms, often cause traders to ‘over-trade’. If the bonus does not suit you, turn it down.
How to Find the Right Broker
But how do you find a good broker? Well, that’s where BitcoinBinaryOptionsReview.com comes in. We assess and evaluate binary options brokers so that traders know exactly what to expect when signing up with them. Our financial experts have more than 20 years of experience in the financial business and have reviewed dozens of brokers.
Being former traders ourselves, we know precisely what you need. That’s why we’ll do our best to provide our readers with the most accurate information. We are one of the leading websites in this area of expertise, with very detailed and thorough analyses of every broker we encounter. You will notice that each aspect of any broker’s offer has a separate article about it, which just goes to show you how seriously we approach each company. This website is your best source of information about binary options brokers and one of your best tools in determining which one of them you want as your link to the binary options market.
Why Use a Binary Options Trading Review?
So, why is all this relevant? As you may already know, it is difficult to fully control things that take place online. There are people who only pose as binary options brokers in order to scam you and disappear with your money. True, most of the brokers we encounter turn out to be legit, but why take unnecessary risks?
Just let us do our job and then check out the results before making any major decisions. All our investigations regarding brokers’ reliability can be seen if you click on our Scam Tab, so give it a go and see how we operate. More detailed scam reports than these are simply impossible to find. However, the most important part of this website can be found if you go to our Brokers Tab.
There you can find extensive analyses of numerous binary options brokers irrespective of your trading strategy. Each company is represented with an all-encompassing review and several other articles dealing with various aspects of their offer. A list containing the very best choices will appear on your screen as you enter our website whose intuitive design will allow you to access all the most important information in real-time.
We will explain minimum deposits, money withdrawals, bonuses, trading platforms, and many more topics down to the smallest detail. Rest assured, this amount of high-quality content dedicated exclusively to trading cannot be found anywhere else. Therefore, visiting us before making any important decisions regarding this type of trading is the best thing to do.
CONCLUSION: Stay ahead of the market, and recover from all kinds of binary options trading loss, including market losses in bitcoin, cryptocurrency, and forex markets too. Send your request via email to - [email protected]
submitted by Babyelijah to u/Babyelijah [link] [comments]

what is this i just downloaded (youtube code?)

so this is kinda a wierd story. I was planning to restart my computer. (cant remember why) I spend most of my time watching youtube videos so i had alot of tabs open. So i was watching the videos then deleting the tab but not opening new tabs. So i was down 2 i think 1 it was a pretty long video so i tried to open a youtube home page tab just to look while i listened to the video. And this is a short exerp of what i got.





YouTube











submitted by inhuman7773 to techsupport [link] [comments]

CRTPi-RGB v3.0 - Buster Busts Loose!

CRTPi Project Presents:

CRTPi-RGB v3.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v3.0 for 888 & 666 05/12/2020 - Emergency Fixes
Changelog: v3.0 for 888 & 666 05/08/2020
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.6 (build 7c5e31bb commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • 4GB (3872256 KB) Uncompressed Image (Compressed via WinRAR to 982256 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system and game-by-game
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with custom runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What about your new Per-Game Configs and Snap-Shader?
The RGB and VGA forks are now utilizing Snap-Shader, plus a newly-enhanced runcommand-onstart script, with provision for user-specified per-game configuration!
Here's the new script:
https://github.com/crtpi/CRTPi-Project/blob/masteRGB-to_opt/retropie/configs/all/runcommand-onstart.sh 
Here's information about Snap-Shader:
https://github.com/ektgit/snap-shader-240p 
And here's a quick rundown on how it works:
Not only does the new script carry forward the per-core scripting for 2048x / 1920x / and 1600x resolutions -- but adds per-game scripting by adding a text file to the system config and naming the rom(s) within the file. This allows you to force 2048x on a system that defaults to 1920x. This is especially useful for PSX, FDS, PCE/PCE-CD, and MAME for the few games that are 256 or 512 wide. Below are some example config files:
/opt/retropie/conifgs/psx/256.txt
Brave Prove Castlevania - Symphony of the Night Crash Bandicoot Final Fantasy Origins Final Fantasy Tactics 
/opt/retropie/conifgs/megadrive/256.txt
Bubble And Squeak Bubsy in - Claws Encounters of the Furred Kind Bugs Bunny in Double Trouble Caesars Palace Captain America and the Avengers 
/opt/retropie/conifgs/fds/320.txt
Akumajou Dracula Donkey Kong Otocky Super Mario Brothers 2 
You get the jist. It doesn't need an extension, not case sensitive, but should match the ROM name (including punctuation) exactly. This forces them to launch in 2048x240p instead of the default 1920x240p. This gives the end user full control on a game-per-game basis over the horizontal integer. You'll still need to write a retroarch game config to override the defaults there, but this at least gets you the right field. For games with odd/shifting vertical resolutions (like Chrono Cross, Battle Arena Toshinden, Castlevania SotN, etc.), a single pass of snap-shader is applied (snap-basic, nearest neighbor filtering, and "don't care" scale).
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v3.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: d9d28f5ae8fe5cc829348be4b5a103fc 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 15 30 42 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 160 202 320 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 137 247 295 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 73 157 204 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-RGB v2.0 - A Whole New World!

CRTPi Project Presents:

DEPRECIATED BUILD, SEE VERSION 3.0!

CRTPi-RGB v2.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.5.17 (build 32617750 commit 03/21/20)
  • Retroarch 1.8.4
  • 8GB (7892992 KB) Uncompressed Image (Compressed via WinRAR to 4658943 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with Kodi 18.2 w/ Convergence Theme
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with Ruckage's runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Emulationstation preloaded with PietDAmore's 240p Honey and Bubblegum themes
  • Emulationstation preloaded with KALEL1981's Super-Retroboy theme
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!

DEPRECIATED BUILD, PLEASE SEE VERSION 3.0!

CRTPi-RGB v2.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: f860516358f5c2941de3bc6170234b88 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 180 202 300 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 152 247 280 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 85 157 192 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-RGB v2.0: A Whole New World!

CRTPi Project Presents:

CRTPi-RGB v2.0

A CRTPi image for 240p via RGB DAC Hats
Other Releases:
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.5.17 (build 32617750 commit 03/21/20)
  • Retroarch 1.8.4
  • 8GB (7892992 KB) Uncompressed Image (Compressed via WinRAR to 4658943 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with Kodi 18.2 w/ Convergence Theme
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with Ruckage's runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Emulationstation preloaded with PietDAmore's 240p Honey and Bubblegum themes
  • Emulationstation preloaded with KALEL1981's Super-Retroboy theme
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v2.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: f860516358f5c2941de3bc6170234b88 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 180 202 300 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 152 247 280 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 85 157 192 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to crtgaming [link] [comments]

CRTPi-RGB v3.0 - Buster Busts Loose!

CRTPi Project Presents:

CRTPi-RGB v3.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v3.0 for 888 & 666 05/08/2020
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.6 (build 7c5e31bb commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • 4GB (3872256 KB) Uncompressed Image (Compressed via WinRAR to 982256 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system and game-by-game
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with custom runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What about your new Per-Game Configs and Snap-Shader?
The RGB and VGA forks are now utilizing Snap-Shader, plus a newly-enhanced runcommand-onstart script, with provision for user-specified per-game configuration!
Here's the new script:
https://github.com/crtpi/CRTPi-Project/blob/masteRGB-to_opt/retropie/configs/all/runcommand-onstart.sh 
Here's information about Snap-Shader:
https://github.com/ektgit/snap-shader-240p 
And here's a quick rundown on how it works:
Not only does the new script carry forward the per-core scripting for 2048x / 1920x / and 1600x resolutions -- but adds per-game scripting by adding a text file to the system config and naming the rom(s) within the file. This allows you to force 2048x on a system that defaults to 1920x. This is especially useful for PSX, FDS, PCE/PCE-CD, and MAME for the few games that are 256 or 512 wide. Below are some example config files:
/opt/retropie/conifgs/psx/256.txt
Brave Prove Castlevania - Symphony of the Night Crash Bandicoot Final Fantasy Origins Final Fantasy Tactics 
/opt/retropie/conifgs/megadrive/256.txt
Bubble And Squeak Bubsy in - Claws Encounters of the Furred Kind Bugs Bunny in Double Trouble Caesars Palace Captain America and the Avengers 
You get the jist. It doesn't need an extension, not case sensitive, but should match the ROM name (including punctuation) exactly. This forces them to launch in 2048x240p instead of the default 1920x240p. This gives the end user full control on a game-per-game basis over the horizontal integer. You'll still need to write a retroarch game config to override the defaults there, but this at least gets you the right field. For games with odd/shifting vertical resolutions (like Chrono Cross, Battle Arena Toshinden, Castlevania SotN, etc.), a single pass of snap-shader is applied (snap-basic, nearest neighbor filtering, and "don't care" scale).
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v3.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: aefbf8eb28d8dd9e1ba6f767725c38cb 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 15 30 42 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 160 202 320 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 137 247 295 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 73 157 204 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to crtgaming [link] [comments]

Binary Options 60 Seconds Indicator 99% Winning Live ... Free 60 Second Binary Options Signals - YouTube 60 Second Binary Options Signals -- Results for February ... Profit In 60 Seconds 30 Day Free Trial Binary Options Signals Binary Options 60 Seconds Indicator %100 Winning Trades ... 60 Second Binary Options Signals - Best Auto Binary Signals‎

The second binary options signal issued at 12:20:25 means: the price for the asset EURGBP at 12:30:00 will be higher than 0.87362. In that case, if you see the price lower than 0.87362 you need to make CALL trade. Of course, to make the correct binary options trade you must close it exactly at 12:30:00. Not a second earlier or later, because the price can differs. Fixed expiry. All binary ... 60-second binary options are for traders that want to be very active in the market and see results fast. Since these options expire in one minute you can potentially do hundreds of trades a day. Like traditional binary options, if you believe an asset will be higher than the current price 60 seconds from now you’ll buy a call option. Sometimes, signal providers provide free binary options signals on a test/trial basis. This can be provided in the form of free binary options signals software or just simply as signals. After a few sample signals, you have to subscribe to their service for premium signals. There are also signal providers who only provide free signals daily. Download the 60 Seconds Simple Binary Options Strategy. EUR/USD 1 Min Chart Trading Example. As shown in the picture above, this strategy identified 4 x 60 seconds trades. Winning percentage: 75%. Open the binary option at the candle next to the signal bar and set exipry to 60 seconds. Click the picture to enlarge. Trading Rules. Buy CALL Option: 60 Seconds Options Signals. 60 seconds (1 minute) Forex, Currencies, Commodities, Crypto, Options Indicator Signals Indicator for Metatrader (MT4, MT5). 90% daily win-rate! 50+ trading signals a day! 100% Non REPAINTING! 100% RELIABLE! Predicts price, price movement direction, generates pure call/put signals. Binary Trading Robot – The award winning binary trading bot can be configured to trade 60 second options if you choose. Works with multiple brokers. Franco – Live Signals via “BOTS” or Binary Options Trading Signals; BinaryOptionRobot – Not a signal service but an automatic trading robot that can and does trade 30 second options. Try ... FBOS service provides free binary options signals, live binary options signals, IQ-option signals every 15 minutes 24 hours per day. The best to use on-trend market conditions. 60 seconds (1 minute) Binary Options Signals Indicator for Metatrader (MT4, MT5). 90% daily win-rate! 50+ trading signals a day! 100% Non REPAINTING! 100% RELIABLE! Predicts price, price movement direction, generates pure call/put signals. Based on Neural Networks. Once you receive the signal, log into your broker account and place winning trade. Works with any financial instrument, be that ... 60 Seconds Binary Options System Indicator. A very simple to use binary options trading indicator. It’s designed to trade 60 seconds buy CALL/buy PUT binary options with 60 seconds expiry time. Green dots indicate to open a buy CALL option with 60 seconds expiry time. Red dots indicate to open a buy PUT option with 60 seconds expiry time.

[index] [3626] [27241] [4924] [29620] [27448] [20975] [12414] [5355] [1533] [8501]

Binary Options 60 Seconds Indicator 99% Winning Live ...

OLYMP TRADE broker account opening link below: https://goo.gl/urftNR this video contains two trading examples with explanation. watch and learn how to trade ... The 60 second option is similar to the standard binary option except for two key aspects. The investment amount is as low as $5.00 per trade and the option expires in 60 seconds instead of the ... Therefore, what makes a profit in a 60 second software makes it easy to create high-precision and profitable 1-minute binary options. Trading signals of more than 20 currency pairs, which means ... Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. http://winningbinarysignals.com/special-offer Sign up through the link above to get your signals. December 3rd Binary Options Signals Result. Trading Signals... Binary Options Signals Indicator 60 Second! 90% daily win-rate. 100+ signals per day. 600% profit per 1 hour! Non-Repainting! Easy to use, works with any broker, any assets. Hi Friends I will Show This Video Binary Options 60 Seconds Indicator Signal 99% Winning Live Trading Proof -----...

https://binary-optiontrade.balboycontsali.gq